|
Floor Cleaner
-
Cleans and removes built-up wax and dirt from wood floors prior to re-finishing
-
Does not strip off varnishes
-
Easy to use
-
Leaves the surface ready to be re-finished
Liberon Floor Cleaner is ideal for lifting old waxes, dirt and grease marks from wood floors, leaving the
surface ready to be re-finished.
Application
For best results soak a pad of Liberon Steel Wool (grade 0000 or 00) with Liberon Floor Cleaner and
gently scrub the surface, going with the grain where possible. Allow a few minutes for the Floor Cleaner
to work, then while the surface is still wet use a clean, cotton cloth to wipe off all the old wax.
More than one application may be required on heavily waxed surfaces. Allow the wood to dry out
completely before re-finishing.
Precautions
-
Do not use on water based varnish or plastic and vinyl floors.
-
Dispose of used steel wool and cloths outside to reduce vapour build-up and fire hazard.
-
This product may lift poorly applied shellac sealers, lacquers, varnishes and sealers.
-
This product may dissolve bitumen-based adhesives.
Heath and Safety
Harmful Contains aliphatic solvents
Flammable. Irritating to eyes. Harmful: may cause lung damage if swallowed. Repeated exposure may
cause skin dryness or cracking. Keep out of the reach of children. Do not empty into drains. Use only in
well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show
this container or label.
|
