|
CHESTNUT MELAMINE LACQUER is a quick-drying, hard-wearing lacquer with a melamine additive which provides heat and water resistance. Once dry, the lacquer chemically cures, achieving maximum durability after 7 days.
Melamine Lacquer dries to a gloss finish which can be matted with fine steel wool.
Recommended for interior use only
Application:
Foam brush, brush, cloth or spray gun
Thinning may be required when applying over a large area.
Lathe Work: After preparing the timber, apply Chestnut Cellulose Sanding Sealer (or extra coats of lacquer may be necessary).
Apply Melamine Lacquer with a clean cloth or brush, working quickly to cover the whole surface.
Once dry, the surface can be lightly sanded and further coats of lacquer applied if required.
Melamine Lacquer can be overcoated with WoodWax 22 or Stick Wax.
Drying time: Within 5 minutes under normal conditions
Coverage: 8 - 10m2 per litre
Compatibility:
Can be used over Cellulose Sanding Sealer.
Once dry, Burnishing Cream will give a higher gloss finish.
WoodWax 22 may also be used on top of this product.
Thinner: Cellulose Thinners
Conforms to EN71 for use on toys.
This product does not contain harmful petroleum solvents such as toluene or xylene.
| 
